




Couldn't load pickup availability
A statement six-light brass chandelier with opal glass globe shades, Ø95cm, available in Antique Brass, Antique Silver, Polished Brass, and Satin Brass. Six E27 sockets, max 40W each, dimmable. 100cm adjustable cable. CE, UKCA, and UL certified. Bulbs not included.
| Light source | 6× E27 — max 40W each, dimmable (bulbs not included) |
| IP rating | IP20 — indoor use only |
| Shades | 6× opal glass globes |
| Finishes | Antique Brass, Antique Silver, Polished Brass, Satin Brass |
| Dimensions | Ø95cm × H52cm — weight 11kg |
| Cable length | 100cm — adjustable at installation |
| Dimmable | Yes — with compatible dimmer switch and dimmable E27 bulbs |
| Certifications | CE, UKCA, UL |
| Connection | Hardwired — professional installation required |
At Ø95cm and 11kg, this is a substantial fitting that needs to be planned for — ceiling structure, wiring capacity, and room proportions all matter. The six opal glass globes diffuse each E27 bulb completely, giving an even, glare-free glow across the full spread of the chandelier rather than six visible points of light. The max wattage per socket is 40W (not 60W) because the enclosed globes limit heat dissipation — use modern LED bulbs at 4–6W equivalent (40W) to stay well within this limit. All six sockets are dimmable with a compatible E27 dimmer switch and dimmable bulbs. Four brass finishes are available: Antique Brass for a warm, aged look; Polished Brass for high-shine traditional; Satin Brass for a softer contemporary version; Antique Silver for cooler interiors. The 100cm cable can be adjusted at installation to set the drop height. CE, UKCA, and UL certified. IP20 rated; dry indoor use only. Hardwired; professional installation by a qualified electrician is essential given the weight and wiring requirements.
Best suited to dining rooms, entrance halls, or double-height living spaces where the Ø95cm spread can be appreciated. For a dining table, the bottom of the chandelier should sit approximately 75–85cm above the table surface. Confirm ceiling joist position and load capacity with your electrician before ordering — at 11kg, this fitting requires a solid fixing point. Browse the full chandeliers collection or read our chandeliers guide for sizing and placement advice.
The fitting height is 52cm, plus the cable drop (up to 100cm, adjustable). For a dining room, the bottom of the chandelier should sit 75–85cm above the table. For a hallway or living room, allow at least 210cm clearance from the floor to the bottom of the fitting. A minimum ceiling height of 280–300cm is recommended for this size of chandelier.
The enclosed opal glass globes limit heat dissipation, so the maximum safe wattage per socket is 40W. Modern LED bulbs at 4–6W (equivalent to 40W) run cool and are well within this limit. Do not exceed 40W per socket with any bulb type.
At 11kg, this chandelier must be fixed to a ceiling joist or a dedicated load-bearing fixing — a standard plasterboard fixing is not sufficient. Your electrician will assess the ceiling structure and install the appropriate fixing before hanging the fitting. Do not attempt to install this without professional help.
Yes — but you need both dimmable E27 LED bulbs (one per socket, six total) and a compatible dimmer switch rated for the combined load. Not all dimmers work with all LED bulbs. Check compatibility and total wattage with your electrician before purchasing your dimmer.
Yes — the 100cm cable can be trimmed at installation to set the drop height you need. Decide on your preferred drop before your electrician installs the fitting, as adjusting it afterwards requires disconnecting the chandelier.
Browse the chandeliers collection or read our chandeliers guide. Free standard delivery over €50 — easy returns included.
Thanks for subscribing!
This email has been registered!