




Couldn't load pickup availability
Free delivery over €50 · 30-day returns guarantee with free returns
Industrial vintage pendant in acrylic and metal, E27 socket, LED bulb included (3000K warm white), IP20, 90–260V. Body: L22 cm × W10 cm, 100 cm suspension cable, Ø10 cm canopy. Black finish. Not dimmable. Hardwired connection.
| Light source | E27 — LED bulb included (3000K warm white) |
| Voltage | 90–260V AC |
| IP rating | IP20 — indoor use only |
| Material & finish | Acrylic and metal — black finish |
| Body dimensions | L22 cm × W10 cm |
| Suspension cable | 100 cm |
| Canopy | Ø10 cm |
| Dimmable | No |
| Connection | Hardwired |
The rectangular body (L22 × W10 cm) is an unusual format for a pendant — more elongated than a standard round or dome shade, it reads as a deliberate industrial reference, closer to a workshop or factory lamp than a domestic fitting. The black metal and acrylic construction keeps the silhouette clean and graphic. The E27 socket accepts any standard replaceable bulb — the included LED at 3000K warm white is a good starting point; a filament-style LED at 2700K would enhance the vintage character further. The fitting is not dimmable; brightness is fixed by the bulb wattage. The 100 cm cable suits standard ceiling heights of 2.4–2.7 m when hung at the recommended 70–80 cm above a dining surface. IP20 means indoor-only use; not suitable for bathrooms or damp areas.
The compact L22 cm body works well as a single pendant above a small table, kitchen island or bar counter, or grouped in a row of two or three at equal height for a linear industrial effect above a longer surface. The rectangular format aligns naturally with rectangular tables and islands, creating a visual correspondence between the fitting and the surface below. In a living room or bedroom, a single pendant at lower hanging height creates a focused, intimate light. Hardwired installation requires a qualified electrician. Browse our full pendant lights collection or read our industrial lighting guide for placement ideas.
Yes — the E27 socket accepts any standard replaceable bulb. The included LED at 3000K warm white is a good starting point. For a more atmospheric vintage look, a filament-style LED at 2700K works well with the black metal finish. The fitting is not dimmable, so choose the wattage based on the brightness level you need.
Yes — the elongated rectangular body directs light primarily downward and slightly along the length of the fitting, rather than in a uniform 360° spread. This makes it well-suited to linear surfaces like bar counters, kitchen islands and rectangular dining tables, where the light pool aligns naturally with the surface below.
For a table up to 120 cm, a single pendant centred above works well. For longer tables of 150–200 cm, two pendants in a row at equal spacing create a balanced linear effect. Three pendants suit very long tables or kitchen islands above 200 cm. Space them evenly and hang the base 70–80 cm above the surface.
No — IP20 means no moisture protection. This fitting is suitable for dry indoor rooms only. Do not install in bathrooms, covered terraces, or any area exposed to humidity or condensation.
Yes — this is a hardwired pendant that connects directly to your mains supply. There is no plug-in option. Installation must be carried out by a qualified electrician.
Browse our pendant lights collection or read our industrial lighting guide. Free delivery on orders over €50. 30-day returns with free returns.
Thanks for subscribing!
This email has been registered!