




Couldn't load pickup availability
Free delivery over €50 · 30-day returns guarantee with free returns
Flush LED ceiling light in metal and aluminium, integrated LED, IP20, 90–260V, black finish. Available in three configurations: A (round Ø50 cm × H11 cm), B (round Ø50 cm × H11 cm, higher output) and C (rectangular 70×110 cm × H11 cm). Choose Warm White (3000K), Cool White (4000K) or Dimmable. Integrated LED — no bulb to buy. Hardwired connection.
| Light source | Integrated LED — fixed, non-replaceable |
| Colour temperature | Warm White 3000K · Cool White 4000K · Dimmable |
| Power | 60–176W (varies by configuration) |
| Voltage | 90–260V AC |
| IP rating | IP20 — indoor use only |
| Material & finish | Metal and aluminium — black finish |
| Dimensions — A | Round Ø50 cm × H11 cm |
| Dimensions — B | Round Ø50 cm × H11 cm (higher output) |
| Dimensions — C | Rectangular 70×110 cm × H11 cm |
| Dimmable | Yes — Dimmable variant only |
| Mounting | Flush ceiling |
| Connection | Hardwired |
The flush mounting and H11 cm profile make this fitting ideal for rooms with standard or low ceiling heights where a pendant or semi-flush fitting would intrude on headroom. The black frame provides a clean graphic contrast against white or light-coloured ceilings — more visible than a white fitting, which suits interiors where the ceiling light is intended to be a design element rather than disappear. The integrated LED is fixed and non-replaceable; the fitting is designed to last the life of the module. Configurations A and B share the same Ø50 cm round format but differ in power output — B delivers higher lumen output and suits larger rooms. Configuration C is rectangular (70×110 cm) and provides broad, even coverage suited to open-plan living areas, large bedrooms or kitchen-dining spaces. The Warm White (3000K) and Cool White (4000K) variants operate at fixed brightness; the Dimmable variant allows brightness adjustment via a compatible dimmer switch — confirm dimmer compatibility before purchase. Colour temperature is fixed per variant and cannot be changed after purchase. IP20 means indoor-only use.
Configuration A (Ø50 cm) suits rooms of approximately 15–20 m² as a primary source; B (Ø50 cm, higher output) extends effective coverage to 20–25 m²; C (70×110 cm) is suited to larger open-plan spaces of 25–35 m² or more. For living rooms where a single ceiling source feels flat, pair with floor or table lamps to layer the light. Hardwired installation requires a qualified electrician. Browse our full ceiling lights collection or read our ceiling lighting guide for placement advice.
A and B are both round at Ø50 cm × H11 cm, but B has a higher power output and suits larger rooms. C is rectangular at 70×110 cm × H11 cm and provides broader, more even coverage for open-plan spaces. All three share the same black finish, flush mounting and colour temperature options.
The Dimmable variant requires a compatible LED dimmer switch — it does not work with standard on/off switches for dimming. Confirm dimmer compatibility before purchase. The Warm White and Cool White variants are not dimmable and operate at fixed brightness.
No — this fitting uses an integrated LED module that is fixed and non-replaceable. There is no separate bulb socket. The LED is designed to last the life of the fitting.
No — IP20 means no moisture protection. This fitting is suitable for dry indoor rooms only. Do not install in bathrooms, covered terraces, or any area exposed to humidity or condensation.
Yes — this is a hardwired ceiling light that connects directly to your mains supply. There is no plug-in option. Installation must be carried out by a qualified electrician.
Browse our ceiling lights collection or read our ceiling lighting guide. Free delivery on orders over €50. 30-day returns with free returns.
Thanks for subscribing!
This email has been registered!